Oculus You Are Trying Too Often Please Try Again Later
Like with most Android-based devices (and tech in general) you are spring to get unexpected behavior with Oculus Quest two at some signal in time.
If your Quest 2 is currently stuck in a boot loop and simply keeps restarting, and then yous accept arrived at the right identify.
Based on my ain feel and the knowledge shared by other users, here are the steps you can try to stop the restarting loop and make your Quest 2 kick up normally again:
- Permit your headset work for some time
- Charge your headset
- Do a hard reboot
- Restart your router
- Attempt a different Wi-Fi network
- Cover and uncover proximity sensor
- Manufacturing plant reset
- Contact Oculus support
Let does side by side expect at each of the potential solutions in a bit more particular.
i) Allow Your Headset Work Its Magic
Sometimes the best class of action is to exercise nothing at all.
If your Quest 2 has plenty battery charge, only plow it on and let it keep working and restarting for up to 30 minutes.
You might be surprised to later on find out that the headset was able to resolve the issue itself. If not, I recommend you lot to follow up with a hard reboot, described in step number three.
2) Charge Your Headset
Another thing y'all tin effort to resolve the kick loop result with your Quest 2 is to simply plug in the charger.
If the battery on your headset is empty, then plough your Quest ii off completely and permit information technology accuse for at to the lowest degree half an hour. If y'all know there is plenty of juice left in the headset, exit the charger plugged in, and once more, let it keep restarting on its own.
If the headset is still stuck in a restart bicycle, follow up with a hard reboot, described in the adjacent stride.
3) Do a Difficult Reboot
Similar with most devices, the proficient old "have you lot tried turning it off and back on again" is a miraculous remedy against different issues you might face.
To do a difficult reboot on your Quest 2, turn on the headset and and then hold down the power push button for up to 60 seconds.
Another thing worth trying is to turn your headset off so agree the power button downwardly for a longer period of time.
4) Restart Your Router
Oft the boot loop issues of the Quest two are caused by software updates that are unable to complete successfully for one reason or another (which also leads to the constant restarting).
One of the potential reasons why updating gets stuck is problems with internet connectivity. To overcome the issue, restart your router if possible. (unplugging and so replugging the ability cord is the simplest way to do information technology).
Note! It is worth restarting your router even if other devices using the aforementioned Wi-Fi network accept cyberspace connectivity. Yous can be sure, that restarting your router won't change any settings or network configuration.
5) Try a Different Wi-Fi Network
Depending on the type of boot loop your Quest two is stuck in, changing the Wi-Fi network might not be possible for you.
Notwithstanding, if you tin can change the Wi-Fi network on your headset then go ahead and try an culling i. For instance, a mobile hotspot will exercise just fine for testing purposes (and overcoming the boot loop issue).
It is also possible to change the Wi-Fi network settings, when you lot do a factory reset and complete the initial setup of the headset.
6) Comprehend / Uncover Proximity Sensor
While doing research for the topic, I found out that several people reported that their boot loops problems were caused by issues with the proximity sensor.
The proximity sensor is located slightly upwards in between the lenses and it helps to detect whether the headset is currently worn or non.
Here are a couple of things y'all can endeavor out:
- If you have a custom facial interface installed, remove information technology.
- Attempt roofing the proximity sensor with your finger (or tape) and attempt once again.
If that does not change anything, proceed to the next step.
7) Factory Reset
Doing a factory is often the last resort, yet an extremely effective mode of overcoming a whole range of issues with your Quest two.
Note! A factory reset erases all your games (and game information), videos, photos, etc from the device. You will have to complete the headset initial setup again and reinstall all your games.
If you lot take tried everything else and make up one's mind to go for the mill reset route, at that place are two ways yous can do information technology – by using the Oculus phone app or from the headset.
Since you might be unable to connect your headset via the Oculus phone app because of the boot loop issue, you can complete the factory reset from the headset using these steps:
- Turn off your headset.
- Concur the ability andvolume (-) button on your headset down simultaneously and wait for boot card to appear.
- Utilise the volume buttons to selectManufacturing plant Reset option and press the power button.
- Use the volume buttons to select t Aye and press the power push button to confirm.
It is my sincere hope that if you went this far, yous were able to overcome the boot loop issue on your Quest 2. If not, I but have one more path to a potential solution I tin provide.
As the last pick to overcome the current issue, I recommend yous to contact Oculus Back up and create a support ticket. They know their production and all of its faults all-time after all.
Make sure that you include a detailed description of your problem (video might be helpful too) and all the steps you have taken to resolve the effect.
Being as detailed as possible from the starting time is crucial if yous want answers and tips that might actually lead to the solution.
Source: https://smartglasseshub.com/oculus-quest-2-keeps-restarting/
0 Response to "Oculus You Are Trying Too Often Please Try Again Later"
إرسال تعليق